ESP32-C6 (WiFi/WiFi 6) for CrowPanel

The ESP32-C6 is a powerful Wi-Fi 6 (802.11ax) module designed for integration with the CrowPanel Advanced, providing high-speed wireless connectivity for a wide range of electronic applications. Leveraging the latest Wi-Fi technology, the ESP32-C6 offers enhanced performance with lower latency, higher data throughput, and greater network efficiency, making it ideal for smart electronics and IoT systems.

This module is built around the ESP32-C6 SoC, a versatile chip with a 32-bit RISC-V core, that supports both Wi-Fi 6 and Bluetooth 5.2. Its high-level features include low power consumption, making it suitable for battery-operated devices, and it also integrates seamlessly with other CrowPanel components to create an advanced user interface experience. The ESP32-C6’s advanced security features ensure that your connected devices remain protected from unauthorized access, making it ideal for secure applications in both consumer and industrial settings.

Features:

High-performance RISC-V 32-bit single-core processor up to 160 MHz.
Low-power RISC-V 32-bit processor for efficient operation.
320 KB ROM, 512 KB SRAM, 16 KB LP SRAM, 4 MB SPI flash.
23 programmable GPIOs.
Interfaces: SPI, UART, I2C, I2S, RMT, LED PWM, USB Serial/JTAG.
Advanced security features: Flash Encryption, Secure Boot, Digital Signature, PMP, APM, Secure JTAG.
Wide operating temperature range: -40°C to 85°C.
Compact size and low weight.

Specifications:

Chip Model	ESP32-C6FH4
L1 cache	32KB
ROM	320KB
HP SRAM	512KB
LP SRAM	16KB
FLASH	4MB Quad SPI
Ambient temperature	-40℃~105℃
Voltage	3.3V
Bluetooth Low Energy Radio Specifications
Working channel center frequency range		2402~2480MHz
RF transmission power range		-15.0~20.0dBm
WIFI RF Specifications
Working channel center frequency range		2412~2484MHz
Wireless Standards		IEEE 802.11b/g/n/ax

Pin Configuration:

Pin	Pin Direction	Note
U1RXD	Input	Serial port 0 receiving pin
U1TXD	Output	Serial port 0 receiving pin
GPIO0	Input/Output	GPIO
GPIO1	Input/Output	GPIO
GPIO2	Input/Output	GPIO
3V3		Power supply
GND		Ground wire, connected to the power reference ground
GPIO23	Input/Output	GPIO
GPIO22	Input/Output	GPIO
GPIO21	Input/Output	GPIO
GPIO20	Input/Output	GPIO
GPIO19	Input/Output	GPIO
GPIO18	Input/Output	GPIO
BOOT	Press and then tap the RST key to enter the burning mode
RST	Press it to re-run the program and also to burn the program.